Description

The PCI-7300 is a high speed 16-bit digital input/output interface card based on the 32-bit PCI Bus architecture. High performance designs and the state-of-the-art technology make this card is ideal for ultra-high speed digital input and output applications. The PCI-7300 performs high-speed data transfers using bus mastering Direct Memory Access (DMA) through 32-bit PCI-bus. The maximum data transfer rate can be up to 40MB per second.

A 64K FIFO on-board and bus mastering PCI controller makes PCI-7300 the fastest digital I/O card on the planet.

Retour

Features

• 16-CH digital Inputs
• 16-CH digital Outputs
• 32-bit PCI bus form factor
• Up to 40 MB data transfer rate
• On-board internal timer pacer trigger
• Internal timer controls input sampling rate
• Internal timer control digital output rate
• ACK and REQ for handshaking
• On-board FIFO for both digital input an output
• Multiple interrupt sources are selectable by software
• 50-pin D-type connector
• Compact size: half-size PCB

Software

There are several software options to help you get your application running quickly and easily.

Linking with data acquisition software packages
The following drivers are available for standard industrial software

• DasyLab 3.0
• LabVIEW, LabWindows
• HP-VEE

Custom Programming
The PCI-7300 is supported by a comprehensive set of drivers and programming tools. Software development support is available for :

• MS-DOS C/C++ program library
• PCIS-DASK: Dynamic Linking Library
  for Windows 95 and Windows NT
• DAQ-Bench: Advanced ActiveX Control library
  for Windows 95 and Windows NT

Retour

Specifications

• I/O Base Address : 16 consecutive address locations

Digital I/O

• Channels :
  16 TTL compatible inputs and 16 TTL compatible outputs
• Input voltage :
  Low : min 0 V, max. 0.8V
  High : min. +2.0 V
• Input load :
  Low : +0.5 V @ -0.2 mA max.
  High: +2.7 V @ +20 mA max.
• Output Voltage :
  Low : min. 0 V, max. 0.4 V
  High : min. +2.4 V
• Driving capacity :
  Low : max. +0.5 V @ 8.0 mA (sink)
  High : min. 2.7 V @ 0.4 mA (source)

Transfer Characteristic

• Mode : Bus Mastering DMA
• Data transfer : 8-bit or 16-bit (programmable)
• Timer pacer : 20 MHz max.
• Counter : One 16-bit counter with a 10MHz time base
• Pacer Output : 0.00046 HZ ~ 5 MHz

Physical, Environmental

• Connector : 50-pin D-type connector
• Operating temperature : 0°C ~ 60°C
• Storage temperature : -20°C ~ 80°C
• Humidity : 5 ~ 95%, non-condensing
• Power consumption : +5V @ 820 mA
• Dimensions : Compact size, only 98(H) x 173(L) mm

  Retour

Ordering Information

PCI-7300 : 40MB Ultra-high Speed 16 DIO card

Retour